Display Wavefor
morTraceData
Scaling a nd Positioning a Waveform
Use the horizontal controls to adjust the time base, adjust the trigger point, and to examine waveform details more closely.
You can also use the Wave Inspector Pan and Zoom controls to adjust the display of waveforms. (See page 149, Using
Wave Inspector to Manage Long Record Length Waveforms.)
If you push the Horizontal Position knob and Delay is set to On, the horizontal position is set to 0 seconds. If you push it
and Delay is set to Off, the horizontal position is set to 10%.
Original waveform Scaled horizontally Positioned horizontally
Use the vertical controls to select waveforms, adjust the waveform vertical position and scale, and set input parameters.
Push a channel menu button (1, 2, 3,or4), button as many times as needed and the associated menu items to select,
add, or remove a waveform.
Original waveform Scaled vertically Positioned vertically
108 MDO3000 Series Oscilloscopes User Manual
To Next Page
Loading...
Need help?
General
