Commands Listed in Alphabetical Order
NOTE. Attempti
ng to give two aliases the same name causes an error. To give a
new alias the name of an existing alias, the existing alias must first be deleted.
Group
Alias
Syntax
ALIas:DEFine <QString><,>{<QString>|<Block>}
ALIas:DEFine? <QString>
Related Commands
ALIas[:STATE]
Arguments
The first <QString> is the alias label.
This label cannot be a command name. Labels must start with a letter and can
contain only letters, numbers, and underscores; other characters are not allowed.
The label must be less than or equal to 12 characters.
The second
<QString> or <Block> is a complete sequence of program messages.
The messages can contain only valid commands that must be separated by
semicolons and must follow all rules for concatenating commands. The sequence
must be less than or equal to 256 characters.
Examples
ALIAS:DEFINE "ST1",":RECALL:SETUP 5;:AUTOSET
EXECUTE;:SELECT:CH1 ON"
defines an alias named "ST1" that sets
up the oscilloscope.
ALIAS:DEFINE? "ST1" returns :ALIAS:DEFINE "ST1",#246
:RECALL:SETUP 5;:AUTOSET EXECUTE;:SELECT:CH1 ON
ALIas:DELEte:ALL (No Query Form)
Deletes all existing aliases.
Group
Alias
Syntax
ALIas:DELEte:ALL
Related Commands
ALIas:DELEte[:NAMe]
Examples
ALIAS:DELETE:ALL deletes all existing aliases.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-143
To Next Page
Loading...
Need help?
General
