Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
Returns
<NR1> = 1 if the d
isplay system is in the preview state.
<NR1> = 0 if the display system is not in the preview state.
HORizontal:RECOrdlength
Sets the horizontal record length. The query form of this command returns the
current horizontal record length.
Group
Horizontal
Syntax
HORizontal:RECOrdlength <NR1>
HORizontal:RECOrdlength?
Arguments
<NR1> represents the horizontal record length value.
NOTE. The supported horizontal record length values for models MSO4104B–L,
MSO4102B-L, DPO4104B-L, and DPO4102B-L are 1,000, 10,000, 100,000,
1M and 5M. The supported record length values for all other models are 1,000,
10,000, 100,000, 1M, 5M, 10M and 20M, with the exception of MDO3000, which
does not support 20M record length.
Examples
HORIZONTAL:RECORDLENGTH 10000 specifies that 10000 data points will be
acquired for each record.
HORIZONTAL:RECORDLENGTH? might return :HORIZONTAL:RECOrdlength
1000
indicating that the horizontal record length is equal to 1000 data points.
HORizontal:SAMPLERate? (Query Only)
The command form is ignored. The query returns the sample rate for analog
channels in samples per second.
Group
Horizontal
Syntax
HORizontal:SAMPLERate?
Examples
:HORIZ
ontal:SAMPLERate? might return 5.0000E+9 indicating that the current
sample rate for analog channels is 5G samples per second.
2-348 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English