Commands Listed in Alphabetical Order
Related Commands
CH<x>:SCAle,
MATH[1]:VERTical:SCAle
Arguments
<NR3> is a floating point number that specifies the gain in user units-per-division.
Examples
REF4:VERTICAL:SCALE 100E-03 sets the Reference 4 scale to 100 mV per
division.
REF4:VERTICAL:SCALE? might return :REF2:VERTICA L:SCALE
1.0000e+00
indicating that the current vertical scale setting for Reference 2 is
1 V per division.
REM (No Query Form)
Embeds a comment within programs as a means of internally documenting the
programs. The oscilloscope ignores these embedded comment lines.
Group
Miscellaneous
Syntax
REM <QS tring>
Arguments
<QString> is a string that can contain a maximum of 80 characters.
Examples
REM "This is a comment" is a comment string that the oscilloscope will
ignore.
RF:CLIPPing? (Query Only)
Returns a boolean indicating whether the RF input is “clipping” due to input
over/under-range detection.
Conditions
MDO3000, MDO4000/B, or MDO4000C models with option SA3 or SA6 only.
Group
RF
Syntax
RF:CLIPPing?
Returns
1 or ON indicates that the RF input is clipping.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-545
To Next Page
Loading...
Need help?
General
