Commands Listed in Alphabetical Order
Arguments
INTERnal speci
fies to use the internal 10 MHz crystal oscillator as the time
base reference.
EXTernal specifies to use a user-supplied external signal as the time base
reference.
Examples
ROSC:SOURCE? might return INTERNAL, indicating that the 10 MHz crystal
oscillator is being used as the time base reference.
ROSc:STATE? (Query Only)
This query returns an enumeration value that indicates the lock state of the
reference oscillator specified by the
ROSc:SOUrce command. The values
returned are
LOCKED or UNLOCKED.
Group
Miscellaneous
Syntax
ROSc:STATE?
Related Commands
ROSc:SOUrce
Examples
ROSC:STATE? might return LOCKED, indicating that the time base reference is
locked.
*RST (No Query Form)
Resets the oscilloscope to the factory default settings. The *RST command does
not alter the following:
Calibration data that affect device specifications
The Output Queue
The Service Request Enable Register setting
The Power-on status clear flag setting
Alias definitions
Stored settings
The *PUD? Response
Any of the values associated with the DATA command.
Oscilloscope password
2-592 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
