Specifications
Mechanical Sp
ecifications
The following table shows the mechanical specifications for the MDO4000 Series
oscilloscopes.
Table 13: Me
chanical specifications
Characteristic Description
Weight
Benchtop configuration (oscilloscope only)
Requirements that follow are nominal:
11.0 lbs (5
.0 kg), stand-alone instrument, without front cover.
18.8 lbs (8.5 kg), instrument with rackmount, without front cover
23.6 lbs (10.7 kg), when packaged for domestic shipment (without rackmount)
Dimensions
Benchtop
configuration (oscilloscope only)
Requirements that follow are nominal and unboxed
Height:
9.0in(2
29 mm) feet folded in, handle folded down
9.8 in (249 mm) feet folded out, handle folded down
11.5 in (292 mm) feet folded in, handle folded up
12.3 in
(312 mm) feet folded out, handled folded up
Width:
17.3 in (439 mm) from handle hub to handle hub
Depth:
5.8 in (147 mm) from back of feet to front of knobs
6.1 in (155 mm) from back of feet to front of front cover
9.8 in
(249 mm) from handle to front of knobs (handle folded to back side of unit)
Box Dimensions:
Height: 15.7 in (399 mm)
Width
: 15.6 in ( 396 mm)
Length: 22.2 in (564 mm)
Rackmount configuration
Requ
irements that follow are nominal and unboxed (5U rack sizes):
Height: 8.6 in ( 218 mm)
Width: 19.2 in (488 mm), from outside of handle to outside of handle
Dep
th: 15.1 in (384 mm), from outside of handle to back of slide
Cle
arance Requirements
0mm
(0 in), top
0 in (0 mm), bottom, on feet, with flip stands down
2 in (50.8 mm), left side (facing the front of the instrument)
0i
n (0 mm), right side (facing the front of the instrument)
2 in (50.8 mm), rear (where the power cord is plugged in)
24 MDO4000 Series Specifications and Performance Verification
To Next Page
Loading...
Need help?
General
