Tektronix MSO2012B User Manual

Save and Recall I
nformation
5. Push the Save to Selected File button to
save the file.
Save to
Selected
File
Quick Tips
Recalling t he Default Setup. P ush the front-panel Default Setup button to initialize the oscilloscope to a known
setup. (See page 43, Using the Default Setup.)
Saving with One Button Push
After you have de fined the s ave/recall parameters with the Save/Recall Menu button and menu, you can save files w ith a
single pus
hoftheSave button. For example, if you have defined the save operation to save waveform data to a USB drive,
then each push of the Save button will save current waveform data to the defined USB drive.
1. To define the Save button behavior, push
Save/Rec
all M enu .
2. Push Assign Save to button.
Save
Screen
Image
Save
Wavefor
m
Save
Setup
Recall
Waveform
Recall
Setup
Assign
Save|to
Setup
File
Utilities
3. PushtheactiontoassigntotheSave button.
Assign
Save to
Screen
Imag
e
Wavef
orm
Setu
p
Image
Setup &
Wave
form
4. From now on, when you push Save the
osc
illoscope will perform the action that you
just spec ified rather than requiring you to
navigate through the menus each time.
118 MSO2000B and DPO2000B Series O scilloscopes User Manual

Tektronix MSO2012B Specifications

General

Brand	Tektronix
Model	MSO2012B
Category	Test Equipment
Language	English