Tektronix MSO2024B User Manual

Installation
Installing an Application Module
CAUTION. To avoid damage to the oscilloscope or application module, observe ESD (electrostatic d ischarge) precautions.
(See page 10, Pow
ering On the Oscilloscope.)
Turn off the os
cilloscope power while removing or adding an application module.
(See page 11, Po
wering Off the Oscilloscope.)
Optional application module packages extend the capability of your oscilloscope. You can install one or two application
modules at one time. An application module goes into the slot with a window in the upper right corner of the front panel.
Another slo
t is directly behind the one that you can see. To use this slot, install the module with the label facing away from you.
For more in
formation on how to install and test application modules, refer to the MSO/DPO2000B and MSO/DPO2000
Series Oscilloscopes Application M odule Installation manual.
NOTE. If you remove an application module, the features provided by the application module become unavailable. To
restore th
e features, turn off the oscilloscope power, reinstall the module and turn on the oscilloscope power.
Changing the User Interface Language
To change the language of the oscilloscope user interface, and to change the front-panel button labels through the use
of an overlay:
1. Push Utility.
2. Push Utility Page.
Utility
Page
3. Turn multipurpose knob a and select Config.
Utility
Page
Config
Language
English
Set Date &
Time
TekSecure
Erase
Memory
About
4. Push L anguage from the resulting
lower-bezel menu.
14 MSO2000B and DPO2000B Series Oscilloscopes User Manual

Tektronix MSO2024B Specifications

General

Brand	Tektronix
Model	MSO2024B
Category	Test Equipment
Language	English