Installation
8. Start your browser on your remote computer. In the browser address line, enter the IP address or, if DHCP is set to On
in the oscilloscope, simply enter the instrument name.
You should now
see the e*Scope screen showing the oscilloscope display on your Web browser. If e*Scope does not
work, rerun the procedure. If it still does not work, contact qualified service personnel.
Connecting a USB Keyboard to Your Oscilloscope
You can connect a USB keyboard to the USB Host port on the fr ont panel of the oscilloscope. The oscilloscope will detect the
keyboard, even if it is plugged in while the oscilloscope is powered on. (See page 41, Labeling Channels and Buses.)
MSO2000B and DPO2000B Series Oscilloscopes User Manual 25
To Next Page
Loading...
Need help?
General
