Tektronix MSO4000B Series User Manual

Display Wavefor
mData
2. Push D15–D0 on
the lower menu.
D15 – D0
On/Off
Thresholds Edit Labels MagniVu
On |
Off
Height
S |ML
3. Push Select on the side menu.
Select
(a) D0
(b) 1.04 div
Display
On|Off
Turn on
D7–D0
Turn on
D15–D8
4. Turn multipurpose knob a to select the
channel t
o move.
5. Turn multipurpose knob b to move the
selected channel.
NOTE. The display of the channel (or group)
only moves after you stop rotating the knob.
6. To change the scale (height) of the digital
channels, push the lower-menu Height
button.
NOTE. The S (Small) s election will display
each waveform at 0.2 divisions tall. The M
(Medium) selection will display each waveform
at 0.5 divisions tall. The L (Large) selection will
display each w aveform at 1 division tall. L only
works if there is enough room in the display to
display the waveforms. You can display up to 10
L waveforms at one time.
7. You can label individual digital channels for
easier identification. (See page 47, Labeling
Channels and Buses.)
MSO4000B and DP O4000B Series Oscilloscopes User Manual 101

Tektronix MSO4000B Series Specifications

General

Brand	Tektronix
Model	MSO4000B Series
Category	Test Equipment
Language	English