Acquire the Sign
al
2. Push and hold Menu Off.
3. Release Menu Off, and then release
Autoset.
4. Select the desired side menu setting.
Autoset
Enabled
Autoset
Disabled
Quick Tips
To position the waveform appropriately, Autoset may c hange the v ertical position. Autoset always sets vertical offset
to0V.
If you use Autoset w hen no channels are displayed, the instrument turns on channel 1 and scales it.
If you use Autoset and the oscilloscope detects a video signal, the oscilloscope automatically sets the trigger type to
video and makes other adjustments to display a stable video signal.
Acquisition Concepts
Before
a signal can be displayed, it must pass through the input channel where it is scaled and digitized. E ach channel
has a dedicated input amplifier and digitizer. Each channel produces a stream of digital data from which the instrument
extracts waveform records.
Sampl
ing Process
Acquisition is the process of sampling an
analog signal, converting it into digital
data
, and assembling it into a w aveform
record, which is then stored in acquisition
memory.
Input signal
Sampled points
Digital values
MSO4000B and DP O4000B Series Oscilloscopes User Manual 51
To Next Page
Loading...
Need help?
General
