Tektronix MSO4000B Series User Manual

Using Applicati
on Modules
Using Application Modules
Optional application module packages extend the capability of your oscilloscope. (See page 16, Application Module Free
Trial.) (See page 16, Installing an Application Module.)
Refer to the MDO4000, MSO 4000, MSO4000B, DPO4000, and DPO4000B Series Application Model Installation Instructions
that came with your application m odule for instructions on installing and testing an application m odule. Some modules are
described in the following list. Additional modules may be available. Contact y our Tektronix representative or visit our Web
site at www.tektronix.com for more information. Also, refer to Contacting Tektronix at the beginning of the manual.
The DPO4AERO Aerospace Serial Triggering and Analysis Module adds triggering and analysis on MIL-STD-1553
buses.
The DPO4AU DIO Audio Serial Triggering and An alysis Module adds triggering and analysis on I
2
S, Left Justified
(LJ), Right Justified (RJ), and TDM buses, and analytical tools to help you efficiently analyze your serial bus. These
include digital views of the signal, bus views, packet decoding, search tools, and event tables with timestamp information.
The DPO4AUTO Automotive Serial Triggering and Analysis Module adds triggering and analysis on packet level
informationinserialbu
ses used in automotive designs (CAN and LIN), and analytical tools to help you efficiently
analyze your serial bus. These include digital views of the signal, bus views, packet decoding, search tools, and event
tables with timestamp information.
The DPO4AUTOMAX FlexRay, CAN, and LIN Serial Triggering and Analysis M odule offers the features of the
DPO4AUTO Module plus FlexRay serial bus support, and analytical tools to help you efficiently analyze your serial bus.
These include digital views of the signal, bus views, packet decoding, search tools, and event tables with timestamp
information.
The DPO4COMP Computer Serial Triggering and Analysis M odule adds triggering and analysis on byte or packet
level information in RS-232, RS-422, RS-485, and UA RT buses, and analytical tools to help you efficiently analyze
your serial bus. These include digital views of the signal, bus views, packet decoding, s earch tools, and event tables
with timestamp information.
The DPO4EMBD Embedded Serial Triggering and Analysis Module adds triggering and analysis on packet level
information in serial buses used in embedded designs (I
2
C and SPI), and analytical tools to help you efficiently analyze
your serial bus. These include digital views of the signal, bus views, packet decoding, search tools, an
d event tables
with timestamp information.
The DPO4E NET Serial Triggering and Analysis M odule adds triggering and analysis on 10BASE-T and 100BASE-TX
bus signals, and analytical tools to help you efficiently analyze y our serial bus. These include digital views of the signal,
bus views, packet decoding, search tools, and event tables with timestamp information.
NOTE. ≥350 MHz bandwidth models are recommended for 100BASE-TX.
The DPO4LMT Limit and Mask Test Module adds testing acquired waveforms against a comparison waveform with
user-defined horizontal and vertical limits or against telecom standard masks or custom masks.
NOTE. ≥350 MHz bandwidth models are recommended for Telecomm standards >55 Mb/s.
1 GHz bandwidth models are recommended for high-speed (HS) USB.
The DPO4PWR Power Analysis Module adds measurements of power quality, switching loss, harmonics, ripple,
modulation, safe operating area, and slew rate (dV/dt and dI/dt).
MSO4000B and DP O4000B Series Oscilloscopes User Manual 161

Tektronix MSO4000B Series Specifications

General

Brand	Tektronix
Model	MSO4000B Series
Category	Test Equipment
Language	English