Save and Recall I
nformation
Setting Description
Drive Letter
Select from I:
to Z:
Server Name or
IP Address
Enter the server name or IP address.
Path
Enter the nam
e of the folder you s et up for sharing.
For example, i f the path on the Apple computer is /User/test, enter test.
User Name
Enter the user name of the account enabled on the Apple. (In the previous
image, both the shared folder and one of the accounts enabled for access to the
folder is “t
est,” but that is not a requirement.)
User Password
Enter the u
ser password. The oscilloscope only displays “*”'s as you type the
password. They are erased from the screen after OK Accept is pushed.
3. Push OK Accept on the side menu.
Printing
aHardCopy
To print an image of what appears on the oscilloscope screen, do the following procedure.
Connect a Printer to Your Oscilloscope
Connec
t a PictBridge printer to the USB device port o n the rear panel, or connect to a networked printer using the Ethernet
port.
NOTE. Refer to the www.tektronix.com/printer_setup Web page for a list of compatible printers.
Set Up Print Parameters
To set up the oscilloscope to print hard copies:
1. Push Utility.
2. Push Utility Page.
Utility
Page
3. Turn multipurpose knob a and select Print
Setup.
Print Setup
MSO4000B and DP O4000B Series Oscilloscopes User Manual 151
To Next Page
Loading...
Need help?
General
