Tektronix MSO56B Printable Help

Field or control Description
Trigger When Sets the trigger when condition.
When set to Inside Range or Outside Range, fields are displayed to set a high and low
boundary pattern for the specified trigger type.
Tap the Binary or Hex field and use the A and B knobs to select and change the values. Or
double-tap on the field and use the virtual keypad to enter values.
Available when Trigger On = Frame ID, Cycle Count, Data, or Identifier & Data.
Frame Type Sets the end of frame type on which to trigger (Static, Dynamic (DTS), ALL).
Available when Trigger On = End of Frame.
A, B knob controls Use the A knob to select (highlight) the digit(s) to change.
Use the B knob to change the value of the digit(s).
Menus and dialog boxes
354 MSO54, MSO56, MSO58, MSO58LP, MSO64 Help

Tektronix MSO56B Specifications

General

Brand	Tektronix
Model	MSO56B
Category	Test Equipment
Language	English