Tektronix RSA306 Technical Reference

Preface
Preface
Verify the proper manual
This manual applies only to instruments calibrated with Version 1 RF Signal Path Gain Cal. or later. For instruments
calibrated with Version 0 RF Signal Path Gain Cal, use the Specifications and Performance Verification manual Tektronix part
number 077-1030-XX available on the Tektronix web site.
(See page vii, Determining R F signal path g ain calibration version.)
The SignalVu-PC software version must be version 3.5.0134 or greater.
Purpose
This manua
l lists the electrical, mechanical, and environmental specifications, and the certifi cation and compliance
statements for the Tektronix RSA306 USB Spectrum Analyzer. Also provided are procedures for verifying the performance of
the instrument.
Documen
tation
The following table lists some of the documentation that is available for this product.
Product documentation
Document Purpose Location
Installation and Safety Instructions Provides software and hardware
installation instructions and
associated safety warnings
Printed manual and also available in electronic
format on the product flash drive and at
www.tektronix.com/manuals
Specifications and P erformance
Verification Technical Reference
(this manual)
Specifications and performance
verification procedures for
checking instrument performance
Available at www.tektronix.com/manuals
SignalVu-PC application help
Using the application and
interpreting the measurement
results
Application help files located within the
application
RSA306 API Programmer manual
Details on commands used to
control the instrument through an
API
Available at www.tektronix.com/manuals
SignalVu-PC Programmer manual
Details on commands used with
the SignalVu-PC application
Available at www.tektronix.com/manuals
vi RSA306 Speci fications and Performance Verification

Tektronix RSA306 Specifications

General

Brand	Tektronix
Model	RSA306
Category	Measuring Instruments
Language	English