Reference
Default Setup
Push the Default Setup button to recall most of the factory option and control
settings, but not all. Appendix D lists the default settings that will be recalled.
Display
Push the Utility button and Display side-menu selection to choose how
waveforms
are presented and to change the appearance of the entire display.
Options Settings Comments
Type Vectors, Dots
Vectors fill the space between adjacent
sample po
ints in the display
Dots display only the sample points
Persist
Off, 1 sec, 2 sec,
5sec,Infinite
Sets the length of time each displayed
sample point remains displayed
Format YT, XY
YT format displays the vertical voltage in
relati
on to time (horizontal scale)
XY format displays a dot each time a sample
is acquired on channel 1 and channel 2
Channe
l 1 voltage or current determines the
X c oordinate of the dot (horizontal) and the
channel 2 v oltage or current determines the
Y coor
dinate (vertical)
Backlight
0to1
00%
Use the M ultipu rp ose knob to adjust the
disp
lay backlight.
Depending on the type, waveforms will be displayed in three different styles:
solid, dimmed, and broken.
TBS1000B and TBS1000B-EDU Series Oscilloscopes User Manual 81
To Next Page
Loading...
Need help?
General
