Appendix B: TPP0051, TPP0101 and TPP0201 Series 10X Passive Probes Information
Standard Acce
ssories
The accessories included with the probe are shown below.
Item Description
Color bands
Use these bands to identify the
oscilloscope channel at the probe head.
Reorder Tek
tronix part number
016-0633-xx (5 pairs)
Hook tip
Press the hook tip onto probe tip and
then clamp the hook onto the circuit.
Reorder Tektronix part number
013-0362
-xx
Ground l
ead, with alligator clip
Secure the lead to the probe head
ground and then to your circuit ground.
Reorder Tektronix part number
196-35
21-xx
Ground spring
The ground spring minimizes
aberr
ations on high-frequency signals
caused by the inductance of the ground
path, giving you measurements with
good
signal fidelity.
Attach the spring to the ground band on
the probe tip. You can bend the spring
out t
o ~0.75 in. away from the signal
test point.
Reorder Tektronix part number
016
-2028-xx (2 ea.)
Adjustment tool
Reorder Tektronix part number
003
-1433-xx
TBS1000B and TBS1000B-EDU Series Oscilloscopes User Manual 115
To Next Page
Loading...
Need help?
General
