Reference
Sine wave Details
FFT
Converts the i nput time-domain signal into its frequency
components and displays the result as a graph of frequency
versus magnit
ude (spectrum). Refer to the FFT chapter
for more information
(See page 51, FFT.)
Undo Autoset
Causes the oscilloscope to recall the previous setup
Square Wave or Pulse
When you use the Autoset function and the oscilloscope determines that the signal
is similar to a square wave or pulse, the oscilloscope displays the following
options:
Square wave or Details
Multi-cycle square
Displays several c ycles with appropriate vertical and
horizontal scaling; the oscilloscope displays Pk-Pk, Mean,
Period,
and Frequency automatic measurements
Single-cycle square
Sets the
horizontal scale to display about one cycle of the
waveform; the oscilloscope displays Min, Max, Mean, and
Positive W idth automatic measurements
Rising edge
Displays the edge, and the Rise Time and Peak-to-Peak
automatic measurements
Falling edge
Displays the edge, and the Fall Time and Peak-to-Peak
automatic measurements
Undo Autoset
Causes the oscilloscope to recall the previous setup
Video Signal
When you use the Autoset function and the oscilloscope determines that the signal
is a video signal, the oscilloscope displays the following options:
Video signal optio ns Details
Fields ►All Fields
Displays several fields and the oscilloscope triggers on any
field
Lines ►All L ines
Displays one complete line with parts of the previous and
ne
xt line; the oscilloscope triggers on any line
Lines ►Number
Displays one complete line with parts of the previous and
next line; use the multipurpose knob to select a specificline
number for the oscilloscope to use as a trigger
Odd Fields
Displays several fields and the oscilloscope triggers only on
odd numbered fields
TBS1000B and TBS1000B-EDU Series Oscilloscopes User Manual 75
To Next Page
Loading...
Need help?
General
