Tektronix TDS210 User Manual

Command Groups
TDS200, TDS1000/2000, TDS1000B/2000B, TPS2000 Programmer
2-35
Table 2- 24: Trigger commands
Header Description
TRIGger Force trigger event
TRIGger:MAIn Set main trigger level to 50%; Query
returns main trigger settings
TRIGger:MAIn:EDGE? Return edge trigger settings
TRIGger:MAIn:EDGE:COUPling Set or query the edge trigger cou-
pling
TRIGger:MAIn:EDGE:SLOpe Set or query the edge trigger slope
TRIGger:MAIn:EDGE:SOUrce Set or query the edge trigger source
TRIGger:MAIn:FREQuency?
(TDS1000, TDS2000, TDS1000B,
TDS2000B, and TPS2000 only)
Return trigger frequency value
TRIGger:MAIn:HOLDOff? Return trigger holdoff value
TRIGger:MAIn:HOLDOff:VALue Set or query the trigger holdoff value
TRIGger:MAIn:LEVel Set or query the trigger level
TRIGger:MAIn:MODe Set or query the trigger mode
TRIGger:MAIn:PULse?
(TDS1000, TDS2000, TDS1000B,
TDS2000B, and TPS2000 only)
Return pulse trigger settings
TRIGger:MAIn:PULse:SOUrce
(TDS1000, TDS2000, TDS1000B,
TDS2000B, and TPS2000 only)
Set or query the pulse trigger source
TRIGger:MAIn:PULse:WIDth?
(TDS1000, TDS2000, TDS1000B,
TDS2000B, and TPS2000 only)
Return pulse trigger width parame-
ters
TRIGger:MAIn:PULse:WIDth:POLarity
(TDS1000, TDS2000, TDS1000B,
TDS2000B, and TPS2000 only)
Set or query the pulse trigger polarity
TRIGger:MAIn:PULse:WIDth:WHEN Set or query the pulse trigger when
TRIGger:MAIn:PULse:WIDth:WIDth Set or query the pulse trigger width

Tektronix TDS210 Specifications

General

Brand	Tektronix
Model	TDS210
Category	Test Equipment
Language	English