Tektronix TDS210 User Manual

Command Groups
2-36
TDS200, TDS1000/2000, TDS1000B/2000B, TPS2000 Programmer
Table 2- 24: Trigger commands (Cont.)
Header Description
TRIGger:MAIn:TYPe Set or query the main trigger type
TRIGger:MAIn:VIDeo? Query video trigger parameters
TRIGger:MAIn:VIDeo:LINE
(TDS1000, TDS2000, TDS1000B,
TDS2000B, and TPS2000 only)
Set or query the video trigger line
TRIGger:MAIn:VIDeo:POLarity Set or query the video trigger polarity
TRIGger:MAIn:VIDeo:SOUrce Set or query the video trigger source
TRIGger:MAIn:VIDeo:STANdard
(TDS1000, TDS2000, TDS1000B,
TDS2000B, and TPS2000 only)
Set or query the video trigger
standard
TRIGger:MAIn:VIDeo:SYNC Set or query the video trigger sync
TRIGger:STATE? Return trigger system status
Vertical Commands
Vertical commands control the attributes of the channels. The
SELect:<wfm> command also displays a specified waveform or
removes it from the display. Table 2--25 lists and describes Vertical
commands.
Table 2- 25: Vertical commands
Header Description
CH<x>? Return vertical parameters
CH<x>:BANdwidth Set or query the channel bandwidth
CH<x>:COUPling Set or query the channel coupling
CH<x>:CURRENTPRObe
(TDS1000B, TDS2000B, and
TPS2000 only)
Set or query the scale settings for current
probes

Tektronix TDS210 Specifications

General

Brand	Tektronix
Model	TDS210
Category	Test Equipment
Language	English