Tenda A33 User Manual

Version1.0
41
7 WiFi Settings
7.1 Overview
To access the page, choose WiFi Settings.
On this page, you can set basic WiFi parameters, including enabling/disabling Unify 2.4 GHz & 5
GHz function, changing the WiFi extender’s WiFi name and password and hiding the WiFi network.
Parameter description
Parameter
Description
Unify 2.4 GHz & 5
GHz
It is used to enable or disable the Unify 2.4 GHz & 5 GHz function.
With this function enabled, the 2.4 GHz and 5 GHz networks of the WiFi extender are
unified under one WiFi name and password. You can see only one WiFi network, and
your network devices will automatically connect to the WiFi with stronger signal
strength when connecting to the WiFi network of the WiFi extender.
2.4 GHz Wi-Fi
These two parameters appear only when the Unify 2.4 GHz & 5 GHz function is disabled.
- If your mobile phone and other WiFi enabled devices are far away from the WiFi
extender or separated from the WiF extender by walls, you are recommended to
connect your WiFi enabled devices to the 2.4 GHz Wi-Fi.
- If your mobile phone and other WiFi enabled devices are close to the WiFi extender,
you are recommended to connect your WiFi enabled devices to the 5 GHz Wi-Fi.
5 GHz Wi-Fi

Tenda A33 Specifications

General

Maximum data transfer rate	1000 Mbit/s
Antennas quantity	2
Antenna gain level (max)	5 dBi
Wi-Fi	Yes
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Frequency band	5/2.4 GHz
Signal strength	20 dBm
Top Wi-Fi standard	Wi-Fi 6 (802.11ax)
WLAN data transfer rate (max)	2402 Mbit/s
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Connectivity technology	Wired & Wireless
Ethernet LAN (RJ-45) ports	1
Security algorithms	WPA-PSK, WPA2-PSK, WPA3
Power LED	No
Product type	Network repeater
Product color	White
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Sustainability certificates	CE, RoHS
Certification	FCC
DC output current	1 A
DC output voltage	12 V
Power consumption (typical)	11 W

Weight and Dimensions

Depth	72 mm
Width	123 mm
Height	47.5 mm