Version1.0
48
7.6 Connect to the hidden WiFi network
To connect to the hidden WiFi network of the WiFi extender, you need to manually enter its WiFi
name and password on your WiFi enabled devices.
Suppose that you have enabled Unify 2.4 GHz & 5 GHz function of the WiFi extender, and set
relevant parameters as follows:
WiFi name: Alice
Security: WPA2-PSK (Recommended)
WiFi password: UmXmL9UK
If you forgot the above parameters, please log in to the web UI of the WiFi extender and view
relevant parameters on WiFi Settings page.
Configuration procedure:
An Android phone is used for illustration.
Step 1 Tap Settings on the homepage of your mobile phone to enter the setting page.
Step 2 Tap WLAN to enter the WLAN page, then enable WLAN.
Step 3 Scroll down to the bottom of the WLAN page, and tap Add network.
Step 4 Enter the network name, which is Alice.
Step 5 Set the security mode as WPA/WPA2 PSK. If your mobile phone does not support WPA
/WPA2 PSK, please select another mode containing WPA2-PSK.
Step 6 Enter the password, which is UmXmL9UK in this example.