Tenda A33 User Manual

Version1.0
50
8 Client management
8.1 Overview
To access the page, choose Client Management.
On this page, you can view the wireless clients currently connected to the WiFi network of the
WiFi extender, view the blacklist, and add a wireless client to the blacklist or remove a wireless
client from the blacklist.
After entering the Client Management page, you are led to All Client module by default, which is
shown as below:
Parameter description
Parameter
Description
Device Name
It specifies the name of the wireless client.
Mac Address
It specifies the Mac address of the wireless client.
Connection Type
It specifies the wireless client’s type of connection to the WiFi extender.
Operation
Click Add to Blacklist, then the corresponding wireless client is added to the blacklist.

Tenda A33 Specifications

General

Maximum data transfer rate	1000 Mbit/s
Antennas quantity	2
Antenna gain level (max)	5 dBi
Wi-Fi	Yes
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Frequency band	5/2.4 GHz
Signal strength	20 dBm
Top Wi-Fi standard	Wi-Fi 6 (802.11ax)
WLAN data transfer rate (max)	2402 Mbit/s
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Connectivity technology	Wired & Wireless
Ethernet LAN (RJ-45) ports	1
Security algorithms	WPA-PSK, WPA2-PSK, WPA3
Power LED	No
Product type	Network repeater
Product color	White
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Sustainability certificates	CE, RoHS
Certification	FCC
DC output current	1 A
DC output voltage	12 V
Power consumption (typical)	11 W

Weight and Dimensions

Depth	72 mm
Width	123 mm
Height	47.5 mm