Tenda A33 User Manual

Version1.0
64
10.3 LED indicator
10.3.1 Overview
To access the page, choose More > LED Indicator.
On this page, you can enable/disable the LED indicator of the WiFi extender.
Parameter description
Parameter
Description
Enable
The LED indicator normally shows the status of the WiFi extender.
Disable
The LED indicator of the WiFi extender turns off.
Schedule Disable
The LED indicator of the WiFi extender turns off at the time configured, but works
normally at other times.
10.3.2 Turn off the LED indicator as scheduled
Suppose that the LED indicator needs to light out as you want between 22:00 every day and 7:00
the second day.
Configuration procedure:
Step 1 Start a web browser on the computer connected to the WiFi extender, and enter
re.tenda.cn in the address bar to access the web UI of the WiFi extender...
Step 2 Choose More > LED Indicator.
Step 3 Select Schedule Disable in the drop-down list of LED Indicator.

Tenda A33 Specifications

General

Maximum data transfer rate	1000 Mbit/s
Antennas quantity	2
Antenna gain level (max)	5 dBi
Wi-Fi	Yes
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Frequency band	5/2.4 GHz
Signal strength	20 dBm
Top Wi-Fi standard	Wi-Fi 6 (802.11ax)
WLAN data transfer rate (max)	2402 Mbit/s
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Connectivity technology	Wired & Wireless
Ethernet LAN (RJ-45) ports	1
Security algorithms	WPA-PSK, WPA2-PSK, WPA3
Power LED	No
Product type	Network repeater
Product color	White
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Sustainability certificates	CE, RoHS
Certification	FCC
DC output current	1 A
DC output voltage	12 V
Power consumption (typical)	11 W

Weight and Dimensions

Depth	72 mm
Width	123 mm
Height	47.5 mm