Tenda A33 User Manual

Version1.0
85
A.2 Default parameter values
The following table lists the default parameter values of the WiFi repeater.
Parameter
Default Value
Login address
re.tenda.cn
Login password
None
IP address
192.168.0.254
After expanding the network of the WiFi router successfully,
the WiFi repeater obtains an IP address automatically from
the DHCP server of the upstream device.
Subnet mask
255.255.255.0
After expanding the network of the WiFi router successfully,
the WiFi repeater obtains a subnet mask automatically from
the DHCP server of the upstream device.
DHCP server status
Enabled
It depends on the status of the extending. If the WiFi
repeater expands the network of WiFi router successfully,
the DHCP server will be disabled. Otherwise, it will be
enabled.
SSID
Tenda_EXT
WiFi password
None
Unify 2.4 GHz & 5 GHz
Enabled

Tenda A33 Specifications

General

Maximum data transfer rate	1000 Mbit/s
Antennas quantity	2
Antenna gain level (max)	5 dBi
Wi-Fi	Yes
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Frequency band	5/2.4 GHz
Signal strength	20 dBm
Top Wi-Fi standard	Wi-Fi 6 (802.11ax)
WLAN data transfer rate (max)	2402 Mbit/s
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Connectivity technology	Wired & Wireless
Ethernet LAN (RJ-45) ports	1
Security algorithms	WPA-PSK, WPA2-PSK, WPA3
Power LED	No
Product type	Network repeater
Product color	White
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Sustainability certificates	CE, RoHS
Certification	FCC
DC output current	1 A
DC output voltage	12 V
Power consumption (typical)	11 W

Weight and Dimensions

Depth	72 mm
Width	123 mm
Height	47.5 mm