Side view of handheld
Groove to align
wireless adapter
3. Firmly press the adapter into place so that the adapter sits on top of the handheld
as shown in the following illustration.
Note: The TI-Nspire™ CX handheld can be charged with the wireless adapter attached.
Connecting to the TI-Nspire™ CX Navigator™ System
To connect to the TI-Nspire™ CX Navigator™ network, you must log in to the network
from your handheld. Before you can log in, the teacher must complete the following
tasks:
• Start a class session on their computer.
• Provide you with the class network name, a username and, if necessary, a
password.
Note: Use this method to log in to the network if the operating system on the handheld
is version 3.2 or higher.
Working in a TI-Nspire™ CX Premium Teacher Software Classroom 55
To Next Page
Loading...
Need help?
General
