This product is a digital torque wrench for tightening purpose. Upon reaching the set torque, a buzzer goes off and LED
turns on to signal tightening completion. Applied torque will be indicated on the digital display as well as on LED indicator.
・ The indicator display enables the user to see the setting torque and the actual torque being applied at the same time.
・ Applied torque will be directly reected on the display in a timely fashion.
・ Can register maximum 10 different torque settings (Target torque/Upper limit value/Lower limit value).
・ Multiple units of measure selection through keypad setup: N
･
m, kgf
･
cm,kgf
･
m,lbf
･
in,lbf
･
ft.
・ Maximum 50 of tightening data can be stored in the internal memory, and transferred to PC with RS232C cable (Optional).
・ AA batteries are used (available in the local market).
・ Can be used for re-tightening inspection method as well as loosening torque inspection method.
1) Main body ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ 1pc
2) Operating Instruction ・ ・ ・ ・ ・ ・ ・ 1pc
Only for "-SET" model version
3) AA batteries ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ 2pc
4) Interchangeable head "TQH" ・ ・ ・ 1pc
5) Storage case ・ ・ ・ ・ ・ ・ ・ ・ ・ ・ 1pc
Optional Accessories
・ PC connecting cable (No.585)
・ Data processing software (EXCEL RECEIVER)
Cautions)
The interchangeable head (TQH) included in "-SET" model version does not guarantee its durability for specic continuous
number of use, etc. Use it only with a CPT torque wrench, otherwise the product may not maintain the original durability. In
case of breakage,
Tohnichi will be able to replace it with a new one (at your cost). Repairing may not be acceptable.
5
1.Outline
2.Features
3. Components
To Next Page
Loading...
Need help?
General
