Tornado BD 14/4 User Manual

Technical Service Bulletin
September 19, 2012
a new spin on cleaning
Telephone (630)-818-1300
Fax (630)-818-1301
www.tornadovac.com
service@tornadovac.com
Tornado Industries LLC.
333 Charles Court Suite 109
West Chicago, Illinois 60185
The below diagrams show the correct way for the oat to be installed in the BD 14/4.
Attached please nd out most recent Technical Service Bulletin. Please read this information care-
fully and, as appropriate, forward it to the responsible person in your organization. Tornado Indus-
tries, LLC is committed to providing you with high quality oor cleaning equipment to meet all of your
maintenance need and this information will keep you up to date on changes, enhancements and
improvements to our product offering
If you have any questions on the information, please contact your local Tornado® representa-
tive or the Tornado® service department.
Thank you for being a Tornado® dealer.
The oat in the BD 14/4 is installed in a different manner than it is in our other units. This is due to
the small tank size and the power of the vacuum motor. If it were installed in the same manner as
our other units it would close off the suction while there was still plenty of room in the recovery tank.

Tornado BD 14/4 Specifications

General

Brand	Tornado
Model	BD 14/4
Category	Scrubber
Language	English