Tornado BD 26/27 User Manual

21
THE MACHINE DOES NOT CLEAN
PROPERLY
1. The brushes do not have the suit-
able bristle dimension: contact the
authorized technical assistance.
2. The brushes have got worn bristles.
Check the brushes wear condition and
eventually replace them (the brushes
have to be replaced when the bristles
have reached a height of about 1/2”
(15mm).
To replace the brushes, see instruc-
tions under paragraph “BRUSHES
DISASSEMBLY” and “BRUSHES AS-
SEMBLY”.
3. The detergent solution is insuf-
cient: further open the solution valve
(see under paragraph “FLOW AD-
JUSTMENT OF THE DETERGENT
SOLUTION”).
4. Check that the liquid detergent is in
the recommended percentage.
5. Increase the brushes base pressure
(see under paragraph "ADJUSTMENT
OF THE BRUSHES PRESSURE").
Contact the authorized technical as-
sistance for advice.
THE SQUEEGEE DOES NOT DRY
PERFECTLY
1. Check that the suction function is on
and that the recovery tank is not full.
2. Check that the squeegee rub-
bers are clean (see under paragraph
“SQUEEGEE CLEANING”).
3. Check the adjustment of the height
and the inclination of the squeegee
(see under paragraph “ADJUSTMENT
OF THE SQUEEGEE”).
4. Check that the suction and the
squeegee hoses are correctly inserted
in their proper seats on the recovery
tank.
5. Clean the suction lter (see un-
der paragraph “SUCTION FILTER
CLEANING”).
6. Clean the squeegee hose (see
under paragraph “SQUEEGEE HOSE
CLEANING”).
7. Turn of replace the rubbers if worn
out.
EXCESSIVE FOAM PRODUCTION
Check that low foam detergent has
been used. Add small quantities of anti
foam liquid into the recovery tank.
Please be aware that a bigger quantity
of foam is produced when the oor is
not very dirty. In this case please dilute
detergent solution.
https://harrissupplyind.com - To Order Parts Call 608-268-8080

Tornado BD 26/27 Specifications

General

Brand	Tornado
Model	BD 26/27
Category	Scrubber
Language	English