Maintenance Safety
• Before you leave the operator’s position, do the following:
– Park the machine on a level surface.
– Move the throttle to the low-idle position.
– Disengage the cutting unit(s).
– Ensure that the traction is in neutral.
– Engage the parking brake.
– Shut off the machine and remove the key (if equipped).
– Wait for all movement to stop.
• Allow machine components to cool before performing maintenance.
• If possible, do not perform maintenance while the machine is running. Keep away from
moving parts.
• If the engine must be running to perform a maintenance adjustment, keep your hands,
feet, clothing, and any parts of the body away from the cutting unit, attachments, and any
moving parts. Keep bystanders away.
• Clean grass and debris from the cutting unit, drive, muffler, cooling screen, and the
engine to help prevent fires. Clean up oil or fuel spills.
• Keep all parts in good working condition. Replace all worn, damaged, or missing parts
and decals. Keep all hardware tight to ensure that the machine is in safe working
condition.
• Check the grass catcher components frequently and replace them when necessary.
• To ensure safe, optimal performance of the machine, use only genuine Toro replacement
parts. Replacement parts made by other manufacturers could be dangerous, and such
use could void the product warranty.
• If major repairs are ever needed or if assistance is desired, contact an authorized Toro
distributor.
Recommended Maintenance Schedule
Maintenance
Service Interval
Maintenance Procedure Part No.
Qty Description
After the first 20
hours
Change the engine oil.
38280 1 Bottle of oil
Before each use
or daily
Check the engine-oil level.
- - -
Inspect the air-filter elements.
- - -
Every 50 hours
Clean the air-filter elements. - - -
Every 100 hours
Change the engine oil.
38280 1 Bottle of oil
Inspect and adjust the spark plug;
replace it if necessary.
- 1
Spark plug; obtain from
Honda
Every 300 hours
Replace the paper filter element (More
frequently in dusty operating
conditions).
- 1
Paper filter element; obtain
from Honda
2