To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...What to do if the nail drag contacts the tires on my Toro Farm Equipment?
If the nail drag is contacting the tires on your Toro Farm Equipment, the stop chains are likely not assembled properly. Ensure that the stop chains are crossed and that the bolt securing the chains is installed in the 6th link from the drawbar.
General| Brand | Toro |
|---|---|
| Model | Sand Pro 2040Z |
| Category | Lawn and Garden Equipment |
| Language | English |
Guidelines for safe operation and preventing accidents.
Explains the meaning and location of safety decals on the machine.
Lists parts to verify shipment and media included with the machine.
Procedures for installing attachments and front weights.
Step-by-step guide to connect the battery for the 08706TC model.
Procedure for installing the Roll Over Protection System (ROPS).
Identifies and describes the main controls and components of the machine.
Explains attachment switches, seat adjustment, parking brake, and hour meter.
Technical data including weight, dimensions, and attachments.
Emphasizes critical safety precautions and warnings for operating the machine.
Steps to add or remove weights for machine stability.
Procedure for checking and maintaining the engine oil level.
Instructions for safely fueling the machine with recommended fuel.
Procedure for checking and topping up hydraulic fluid levels.
How to check tire pressure and use the parking brake.
Steps to start/stop the engine and use the safety interlock system.
Steps for operating the control handles and driving forward/backward.
Steps for driving the machine in the backward direction.
Guidance and techniques for raking sand traps effectively.
Procedures for machine break-in, pushing, towing, and transporting.
General advice for optimizing operation and raking techniques.
A schedule outlining maintenance tasks based on operating hours.
A checklist for daily inspection and maintenance tasks.
Instructions for greasing key components at specified intervals.
Procedure for changing engine oil and oil filter.
Instructions for servicing the air cleaner and spark plugs.
Procedures for replacing fuel filters and canister.
Procedures for jump-starting, replacing fuses, and battery service.
Guidelines for safely charging the machine's battery.
Step-by-step instructions for removing and installing the battery.
How to check and clean battery terminals and connections.
Adjusting tracking, drive belt, and tensioner pulley.
Adjusting control handle position, linkage, dampers, and neutral lock.
Adjusting throttle, choke, and governor speed controls.
Procedures for checking and changing hydraulic fluid and filters.
Inspecting hydraulic lines and hoses for leaks and wear.
Common problems with starting, power, overheating, and driving.
