14
English
Before switching on the television put your decoder and media recorder to Standby if they are connected.
To set up the television use the buttons on the remote control as detailed on page 6.
Startup Application
Quick Setup
For 1st use, plug in the television and
press the button. The Quick Setup
screen will appear.
Press ◄ or ► select your language, and
then press OK, the Location screen will
appear.
Press ◄ or ► select Home or Store.
For normal home use, select Home.
4
Press ◄ or ► to select your country and
press OK.
To start Auto tuning press OK.
The search will begin for all available stations.
The slide bar will move along the line as the
search progresses.
You must allow the television to complete
the search.
When the search is complete the television will
automatically select programme position 1. This
may not be a clear picture or the signal may be
weak, so the station order can be changed us-
ing Manual tuning in SET UP menu. See page
Auto Tuning
Note:
As new services are broadcast, it will be
necessary to re-tune the television in order to
view them.
Auto Tuning will completely re-tune the televi-
sion and can be used to up date the channel
list. It is recommended that Auto Tuning
is run periodically to ensure that all new
services are added. All current channels and
settings, e.g. locked channels, will be lost.
From the SET UP menu, press p or q to
select Auto tuning.
Press to start the automatic search.
The search will begin for all available
stations.
4
When the automatic search is completed,
the TV will automatically appear the SET
UP menu.
Closing the Auto tuning menu, press EXIT.
Note:
When you preset the channel which sound
of broadcast transmission system adopts “M”
system, the sound system may not be tuned
correctly if the radio waves transmit badly. At
that time, preset the channel by Manual tuning.
To Next Page
Loading...
Need help?
General
