Toshiba 2060 Service Manual

Dec. 1996 © TOSHIBA CORP. 1 - 9 2060, 2860/70 ADJUSTMENT
Code Function Code Function
54 PFP lower cassette tray motor Tray only rises.
55 PFP lower cassette feed roller clutch At 1st “P” key press, comes on and goes off at 2nd press.
56 Manual feed roller clutch At 1st “P” key press, comes on and goes off at 2nd press.
57 LCF tray motor At 1st “P” key press, rises to the limit and goes down at 2nd press.
58 LCF feed motor At 1st “P” key press, comes on and stops at 2nd press.
60 ADU motor ON 70 OFF
61 PFP main motor ON 71 OFF
80 DF independent aging At 1st “P” key press, comes on and stops at 2nd press.
(single side operation)
81 DF independent aging At 1st “P” key press, comes on and stops at 2nd press.
(double side operation)
82 DF pick-up roller rotation At 1st “P” key press, comes on and stops at 2nd press.
83 DF aligning roller rotation At 1st “P” key press, comes on and stops at 2nd press.
84 DF transport belt rotation (CW) At 1st “P” key press, comes on and stops at 2nd press.
85 DF transport belt rotation (CCW) At 1st “P” key press, comes on and stops at 2nd press.
90 Sorter transport motor ON At 1st “P” key press, comes on and stops at 2nd press.
(403 mm/sec)
91 Sorter bin motor ON (bins move At 1st “P” key press, comes on and stops at 2nd press.
up and down after initialization.)
92 Sorter aging without paper At 1st “P” key press, starts and goes off at 2nd press.
Group
3
3
3
2
3
1
1
3
3
3
3
3
3
3
3
3
<Procedure>
Group (1)
Group (2)
Group (3)
09
03/04
PWR
Operation
(ON)
Code
PRINT
Stop
code
Warm-up
PRINT
09
03/04
C/S
PWR
Code
PRINT
Test mode standby
Warm-up
Operation
(ON)
Code
PWR
Operation
(ON)
09
03/04
C/S
Test mode standby
Warm-up
PRINT
PRINT

Toshiba 2060 Specifications

General

Brand	Toshiba
Model	2060
Category	Copier
Language	English