Toshiba 2060 Service Manual

2060, 2860/70 ADJUSTMENT 1 - 44 Dec. 1996 © TOSHIBA CORP.
1.13 ADU Adjustment
1.13.1 Adjusting the stack guide unit in position
In duplex copying using the ADU, the difference in side deviation on both sides of the copy should be
within ±3 mm. If not, make adjustment as follows:
After stacking sheets of paper on the stack guide, check that the gap between the side stopper and the
edge of the sheet is 1.5 ± 1 mm. To adjust the gap, loosen the side switch bracket fixing screw. Move the
bracket according to the scale. After moving the bracket, initialize the ADU. Check the gap between the
side guide and the paper.
Stacked
sheets
Side
guide
1.5 ± 1 mm
Side guide
Side switch
bracket
ADU motor
bracket

Toshiba 2060 Specifications

General

Brand	Toshiba
Model	2060
Category	Copier
Language	English