Toshiba 2060 Service Manual

2060, 2860/70 MAINTENANCE 2 - 8 Dec. 1996 © TOSHIBA CORP.
2.4 Oiling Cycle Table
*Number Item to Lubricate Type of Oil
46 Paper-feed system drive gears (tooth faces) White grease 80
57 Heat roller drive gears (tooth faces and idler shafts) Silicone oil 80
58 GCB bushings Launa 40 80
(including paper feed section and fuser unit)
59 Cleaner drive gear White grease 80
60 Timing pulley shafts White grease 80
61 Toner cartridge drive gear shaft White grease 80
62 Clamshell lock section White grease 80
Oiling Cycle
Number of copies x 1000
* The number is the same as that in the Periodic Inspection Check List.
Note: Do not apply oil to the rollers, belt and belt pulley.
2.5 Replacement Schedule of Disposable Parts and Supplies
* The number is the same as that in the Periodic Inspection Check List.
Replacement Cycle
(Number of copies x 1000)
*Number Part Name Code
2 Main (cleaning) blade BL-2060D 80 22 4
3 Toner bag TB-2060 20 24 3
6 Drum separation claw – 80 22 14
8 Drum OD-2060 80 24 1
31 Charger wire – 80
33 Grid – 80 20 9
35 Developer material ZD-2060 80 101 3
47 Teflon roller (upper heat roller) HR-2060-U 160 25 2
49 Rubber roller (lower heat roller) HR-2060-L 160 26 4
50 Cleaning felt roller SR-2060-L 80 25 12
52 Scraper (for heat roller) – 80 25 16
Parts List
Page Item
20 6
21 9

Toshiba 2060 Specifications

General

Brand	Toshiba
Model	2060
Category	Copier
Language	English