Maintenance
Wand
Deodorizing Filter
26 27
Deodorizing Filter (Approximately once a month)
1
Remove the cover on the left side of the main unit, and fl ip the power
switch to "OFF".
(Page 24)
2
Remove the deodorizing fi lter.
Hold the knob and pull outward.
Do not pull with undue force. (May cause damage or malfunction.)
Knob
Deodorizing fi lter
3
Clean with a tool such as a toothbrush.
When washing with water, dry off all water before mounting.
Toothbrush, etc.
4
Mount the deodorizing fi lter.
Push fi rmly until
a click sound is
heard.
5
Flip the power switch to ON.
(Page 24)
The "Power" LED lights up.
6
Reinstall the cover.
(Page 25)
Wand (Approximately once a month)
<If you notice dirt (Wand cleaning)>
Soft cloth soaked in water Toilet paper, etc.
(May cause damage.)
1
Extend the wand.
To operate from the back of remote control
Press "Wand cleaning" button.
To operate from the front of remote control
Recommended if the remote control is secured to prevent theft, etc.
(1)
Press "Stopping" button until all LEDs on the remote control start fl ashing.
(about 10 seconds)
(2)
Press "Front cleansing" button about 3 seconds or longer.
2
Wipe with a soft cloth that has been soaked in water and wrung out
thoroughly.
Do not pull, push or press the wand with excessive force.
(May cause damage or malfunction.)
3
Press "Stopping" button on the front side of the remote control.
The wand retracts.
Water comes out from around the wand.
Maintenance