16 17
"ewater+"
*1
is used
automatically to clean the
wand.
• Operation under the initial
settings is described below.
As you
approach
As you
sit
*2
As you
stand up
*2
■
Note
■
Changing
settings
Removing odors inside
the bowl unit
Deodorizer
Starts
the deodorizer
Starts the auto
power deodorizer
( After about 10 seconds)
➝
It stops after about 60
seconds
•
Deodorizing fi lter needs regular
maintenance.
(Page 27)
• "Deodorizer" ON/OFF
• "Auto power deodorizer"
ON/OFF
(Page 38 for all)
• "Auto wand CLEAN"
ON/OFF
(Page 36)
Sanitize the wand with
"ewater+"
*1
Auto wand
CLEAN
Cleans the wand
automatically
( After about 25 seconds)
•Only when the cleansing
functions are used.
➝
The wand extends and
"ewater+"
*1
comes out
from the base of the
wand.
• When the cleansing functions (Rear
cleansing and Front cleansing etc,) have
not been used in 8 hours, the wand is
cleaned automatically.
(Water comes out from around the wand.)
• The pre-mist will not spray for about
90 seconds after you stand up from
the toilet seat.
• "Pre-mist" ON/OFF
(Page 36)
A mist is sprayed inside
the bowl unit to make it
more diffi cult for dirt to
adhere
Pre-mist
Pre-mist
➞
A mist is sprayed
inside the bowl unit
Flush automatically
Auto fl ushing
*3
The toilet fl ushes
*4
(After about 10 seconds)
• Auto fl ush is not available in the
following cases.
•
About 60 seconds after the toilet is
fl ushed.
(After 60 seconds have passed,
fl ush using the remote control.)
•
When the time spent sitting on the
toilet seat is less than about 6 seconds.
(Flush with the remote control.)
• The fl ushing varies depending on how
long you sit on the toilet seat.
Around 6 - 30 seconds: "Light fl ush"
Around 30 seconds or more: "Full fl ush"
"Auto fl ushing" ON/OFF
"Auto fl ush delay"
(5 seconds, 10 seconds
or 15 seconds)
(Page 36 for all)
●
To clean the wand with it extended.
➝"Wand cleaning" (Page 26)
(After wand cleaning, water comes
out from around the wand.)
"ewater+" can also be
used by pressing the
remote control button
Press "Wand
CLEAN" button
■
"Wand CLEAN" LED
Lights to show that the "Auto wand CLEAN" functions
or the "Wand CLEAN" functions are operating.
During "Auto wand CLEAN" or
"Wand CLEAN": Flashes
Lights to show that the "CLEAN"
functions are operating.
*1 What is meant by "ewater+" ?
This water containing hypochlorous
acid generated from chloride ions in
tap water, is widely used for cleaning
and disinfecting items such as food,
utensils and baby bottles.
●
Well water may not deliver the required
effect. (Because the level of chloride
ions is low.)
●
"ewater+" helps to minimize dirty
surfaces, but does not make cleaning
unnecessary.
●
The effect and duration vary depending
on the usage environment and
conditions.
*2 Water comes out from around the
wand.
*3 Except TCF894CG and TCF896CG.
*4 Auto fl ush is not available when using
the toilet from a standing position.
Automatic Functions
Cleaning Features, Convenience Features
Operation
To Next Page
Loading...
Need help?
General
