Thread cutter
z
Reverse sewing is performed while
pressing down the reverse sewing
lever.
Stitch 1 cm from the edge of the •
fabric to prevent unraveling at the
start of sewing.
Sew 3 to 4 reverse stitches at the •
end of sewing.
Note:
Remove your finger from the
reverse sewing lever to return to
forward direction sewing.
Reverse sewing
z
Reverse sewing is performed at the beginning and the end of sewing to prevent the
thread from unraveling.
Reverse sewing
lever
Thread cutter
Line up the two threads, and cut
them with the thread cutter on the
presser bar.
To Next Page
Loading...
Need help?
General
