BAS-SVX44A-EN 37
Other Thermostat Functions
Non-programmable Mode
The thermostat is capable of being configured as non-programmable (refer to Configuration
Option Number 0140 in Table 7, p. 24). If the thermostat is set to non-programmable mode, certain
icons are not displayed and scheduling and override functionality is not available. The Home
screens will similarly display as shown below.
Non-programmable Functionality
• Scheduling and Override modes are not available.
• The following features are not displayed; occupied ( ), unoccupied ( ), period schedules
(
).
• Fan can be set to either AUTO or ON.
• Setpoints are changed directly by touching the setpoint Up/Down arrows. If the system is set
to AUTO,
then the user can toggle between Cool and Heat setpoints with the snowflake icon
( ) and the flame icon ( ).
• All other Non-programmable
Mode functionality is the same as in Programmable Mode,
such as System Mode Setup, Fan Mode, Humidity Setup, or Clock.
Example of Non-programmable
Mode Home Screen: Heat Only
Example of Non-programmable Mode Home Screen:
Auto Heat/Cool With Cool Setpoint
To Next Page
Loading...
Need help?
General
