34
General Information
Brake and Clutch Lever
Adjusters
1. Lever adjuster wheel
An adjuster is fitted to the front brake and
clutch levers (all models except on
Bonneville T100 and Thruxton). The adjusters
allow the distance from the handlebar to the
lever to be changed to one of four positions,
to suit the span of the operator's hands.
To adjust a lever, push the lever forward and
turn the adjuster wheel to align one of the
numbered positions with the triangular mark
on the lever pivot (seen aligned with
position 4 above).
The distance from the hand grip to the
released lever is shortest when set to number
four and longest when set to number one.
Do not attempt to adjust the levers with the
motorcycle in motion as this may lead to
loss of control and an accident.
After adjusting the levers, operate the
motorcycle in an area free from traffic to
gain familiarity with the new lever settings.
Do not loan your motorcycle to anyone as
they may change the lever settings from
the one you are familiar with possibly
causing loss of control or an accident.
To Next Page
Loading...
Need help?
General
