EasyManuals Logo

Triumph BONNEVILLE SE User Manual

Triumph BONNEVILLE SE
123 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
35
General Information
Heat Shield (Thruxton only)
1. Heat shield
Heat shields are fitted to the cylinder head,
on both sides of the motorcycle. The shields
are fitted in order to protect the rider's knee
from potential contact with the cylinder head
which will be hot whenever the engine is
running and for a period afterwards.
Fuel
Fuel Grade
This Triumph motorcycle is designed to run
on unleaded gasoline with a CLC or AKI
octane rating (R+M)/2 of 87 or higher.
Federal regulations require that pumps
delivering unleaded gasoline are marked
'UNLEADED' and that the Cost of Living
Council (CLC) or Anti-Knock Index (AKI)
octane rating is also displayed. These ratings
are an average of the Research Octane
Number (RON) and the Motor Octane
Number (MON).
Warning
Never remove the heat shields from the
cylinder head and always repair or replace
the heat shields if they become damaged
or detached.
Removal of either heat shield may lead to
contact of the rider's leg with hot engine
parts. Contact with hot engine parts may
lead to burns and other skin damage.
cbky
1
Caution
The exhaust system is fitted with a catalytic
converter to help reduce exhaust emission
levels. The catalytic converter can be
permanently damaged if the motorcycle is
allowed to run out of fuel or if the fuel level
is allowed to get very low. Always ensure
you have adequate fuel for your journey.
Caution
The use of leaded gasoline is illegal in
some countries, states or territories. Use of
leaded fuel will damage the catalytic
converter.
P
b
cbny

Table of Contents

Other manuals for Triumph BONNEVILLE SE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph BONNEVILLE SE and is the answer not in the manual?

Triumph BONNEVILLE SE Specifications

General IconGeneral
Displacement865cc
Bore x Stroke90 x 68 mm
Compression Ratio9.2:1
Final DriveX ring chain
ClutchWet, multi-plate
Gearbox5-speed
FrameTubular steel cradle
Engine TypeAir-cooled, DOHC, parallel-twin
Max Torque68 Nm @ 5800 rpm
Fuel SystemMultipoint sequential electronic fuel injection
Exhaust2-into-2 exhaust system
Front Suspension41mm forks
Rear SuspensionTwin shocks
Front BrakesSingle 310 mm disc, 2-piston caliper
Rear BrakesSingle 255mm disc, 2-piston caliper
Front Wheel17 x 3.0in
Rear Wheel17-inch
Rear Tire130/80 R17
Wheelbase1490 mm
Fuel Tank Capacity16 liters

Related product manuals