EasyManuals Logo

Troy-Bilt 34087 User Manual

Troy-Bilt 34087
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Operation
23
WARNING
To avoid injury or property damage:
Before mowing, thoroughly inspect area where mower is to be used
and remove all stones, sticks, wires, bones, nails and other foreign ob-
jects.
Disengage mower blades before crossing gravel drives, roads, or
sidewalks to prevent blades from throwing stones or other hazardous
objects.
WARNING
To avoid injury or property
damage:
Maximum safe operating
angle is 15
o
.
Exceeding maximum safe
operating angle may cause
tipping or loss of footing.
Do not mow wet slopes.
Mow across slopes, not up
and down.
Exercise extreme caution
when changing direction on
slopes.
Mulching Leaves
The mower can also be used to
mow leaves in the fall. The leaf
particles filter down into the lawn
and provide added fertilizer.
The leaves must be dry in order
to be mulched.
Use a slower ground speed if the
leaves are not mulched into fine
particles.
If you mulch oak leaves (which
add acid to the soil), add lime to
the lawn in the spring to reduce the
acidity of the soil.
Keep Mower Blades Sharp
For best mower performance,
keep the blades sharp. A dull
blade will tear, bruise and split the
ends of grass. See blade sharpen-
ing instructions in Section 5:
Maintenance.
Clean Mower Frequently
Clean the underside of the mower
deck frequently to remove grass
build-up. See mower cleaning in-
structions in Section 5:
Maintenance.
Precision Trimming
For precision trimming, use the
slowest gear and inch the mower
along by feathering the Wheel
Drive Control lever. Or, disengage
the wheel drive by releasing the
Wheel Drive Control so that you
can manually maneuver the mower
(if needed, put the Gear Select
Lever in neutral so that the wheels
turn freely).
Mowing Ditches
If you have to mow ditches, stop
the engine and adjust the cutting
height to its highest setting. Mow
in the direction of the ditch. Mow
both sides of the ditch first, and
then mow the bottom. When
mowing ditches, watch out for
cans, bottles, or other debris.
MOWING TIPS AND HINTS
Mow When
Lawn Is Dry
For best results, avoid cutting
grass when it is wet. Wet grass
tends to form clumps which inter-
fere with the cutting action. The
best time to mow is in the late af-
ternoon or early evening when the
grass is usually dry.
Cut Top 1/3 of
Grass Blades
Cutting more than 1/3 of grass
length may cause the grass to be-
come excessively dry. In tall grass,
it may be necessary to mow at a
higher setting and then mow again
at the desired height. NOTE: The
cutting height is critical to achiev-
ing a well-groomed lawn. You
should experiment with various
settings to find that just right
cutting height.
Vary Cutting Pattern
Vary the cutting pattern from
week to week to help prevent mat-
ting of the grass. One week, mow
from north to south, the next week
mow from east to west. Overlap
several inches when mowing to ob-
tain an even appearance.
1
3
Mowing on Slopes
Do not mow excessively steep
slopes (see WARNING statement
below). Slow down and exercise
extreme caution when changing di-
rection on slopes. Before mowing
on slopes, check the engine oil
level and make sure that the level
is at the FULL mark. Maintaining
a FULL oil level is particularly im-
portant when operating on slopes
as oil can be drained away from
vital engine parts.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Troy-Bilt 34087 and is the answer not in the manual?

Troy-Bilt 34087 Specifications

General IconGeneral
BrandTroy-Bilt
Model34087
CategoryLawn Mower
LanguageEnglish

Related product manuals