Truma AquaGo basic User Manual

14
Winterizing the RV with a
winterizing fluid
• Winterizing the RV with a winterizing
fluid is only possible with an installed
bypass kit (not in scope of delivery)
• Refer to the connection diagram
“Winter operation” on page12 for
all letters referred to in the following
description.
Winterizing AquaGo® basic / AquaGo® comfort
1. Close valves A and B.
2. Open valve C.
3. Drain the appliance (“Draining the water and
cleaning the water inlet filter” on page15).
4. Flush the RV’s water system with a suitable
winterizing fluid according to the supplier’s
or RV manufacturer’s guidelines.
Winterizing AquaGo® comfort plus
1. Close valves A, B and E.
2. Make sure that valve D remains in the closed
position.
3. Open valve C.
4. Drain the appliance (“Draining the water and
cleaning the water inlet filter” on page15).
5. Flush the RV’s water system with a suitable
winterizing fluid according to the supplier’s
or RV manufacturer’s guidelines.
6. Close all faucets (if open).
7. Open valve D.
8. Wait until winterizing fluid has drained.
Collect escaping fluid in a suitable vessel.
9. Close valve D.
AquaGo® technical data
BTU/h
(Nominal input rate)
20,000 – 60,000
Fuel LP gas (propane
only)
Fuel inlet pressure 10.5 – 14 in. wc
(26.2 – 34.9 mbar)
Fuel manifold pressure 1.3 – 10 in wc
(3.2 – 24.9 mbar)
Nominal voltage 12 V DC (<1V
pp
)
Power input
AquaGo® basic < 1.5 A
AquaGo® comfort < 2.5 A
AquaGo® comfort plus < 2.5 A
Water operating pressure 65 psi (4.5 bar)
max.
Standard water outlet
temperature
120°F (49°C)
Water volume 0.35 gallons
(1.3liter)
Ambient temperature
AquaGo® basic +32°F…+104°F
(+5°C…+40°C)
AquaGo® comfort
AquaGo® comfort plus
-4°F…+104°F
(-20°C…+40°C)
Dimensions (without flange and frame)
Width Height Depth
in. 12.5 12.5 15.5
mm 318 318 394
Dimensions of frame
Size XS
in. 15.1 15.5 0.8
mm 384 394 20.2
Standard
in. 17.7 17.7 0.8
mm 450 450 20.2
Adapter
in. 20.1 20.1 0.8
mm 510 510 20.2
Installation cutout and depth
Width Height Depth*
in. 12.8 12.8 17.7
>19.7**
mm 324 324 450
>500**
Weight unit without
access door
(approx.)
34.2 lbs (15.5 kg)
Weight access door stan-
dard and access door XS
(approx.)
2.9 lbs (1.3 kg)
Weight access door
adapter kit
(approx.)
5.5 lbs (2.5 kg)
* Depending on application
** Recommended

Truma AquaGo basic Specifications

General

Brand	Truma
Model	AquaGo basic
Category	Water Heater
Language	English