4 Setting up the Printer
4.1 Connecting the Power Cable and Adapter
1. Place the printer on a flat surface.
2. Make sure the power switch on the right side of the printer is set to OFF.
3. Connect the printer to your computer using the supplied USB cable.
4. Connect the power cord to the power adapter.
5. Connect the power adapter to the DC-in port on the rear side of the printer.
IMPORTANT: Make sure the power switch on the right side of the printer is set to OFF before connecting the power adapter
to the printer.
6. Fully insert the power cord plug into the power outlet socket.
To Next Page
Loading...
Need help?
General
