12 STANDARD OVEN OPERATION
Editing a Cooking Profile
To edit a cooking profile, the oven must be in the
COOKING MODE, and the full edit or flex option
must be enabled for each option y
ou want to edit.
F
or more information on selecting between full edit,
rigid, and flex options for each editable setting, see
Edit Modes Select Screen on page 16.
When the rigid option is enabled for a given setting,
the soft key adjacent to that setting (Figure 10) is
disabled and no menu editing is allo
wed.
When the full edit option is enabled for a given
setting, that setting is fully customizable and
changes are saved once the oven returns to the OVEN
OFF or COOLING DOWN MODE.
When the flex option is enabled for a giv
en setting,
that setting is customizable within flex option
limitations (as described in the follo
wing sections),
and changes will r
eset when the o
ven returns to the
O
VEN
OFF
or COOLING DOWN MODE. NOTE: The
flex option does not apply to editing a pr
ofile name.
This section assumes that the full edit option is
enabled (except where otherwise noted) and that a
cooking profile and belt speed have been selected.
Chang
ing a Cooking Profile Name
1. From the cooking screen (Figure 10), press
L1 to access the name change scr
een
(F
igure 11).
2.
Change the name of the cooking pr
ofile.
-
The up key moves forward through the
av
ailable characters. e.g. A,B,C…
- The down key moves backward through the
available characters e.g. A,+,-, ,9,8…
- INS (L1) inserts a space.
- DEL (R1) deletes the selected character.
- ---> (R2) mo
v
es the cursor to the right.
- <--- (L2) mo
v
es the cursor to the left.
3. Press save (R3) to save the changes or cancel
(L3) to cancel any changes.
To Next Page
Loading...
Need help?
General