Ubiquiti UCK-G2-PLUS User Manual

10
Hardware Installation
1. Connect an Ethernet cable (not included) to the
Ethernet Port.
2. Connect the other end of the Ethernet cable to a port on a
network switch, such as a UniFi PoE Switch.
1 3 5 7 9 11 13 15 17 19 21 22
2 4 6 8 10 12 14 16 18 20 22 24
SFP1
SFP2

Ubiquiti UCK-G2-PLUS Specifications

General

PoE Input	802.3af PoE
Management	UniFi Network Application
Product Name	Ubiquiti UniFi Cloud Key Gen2 Plus
Category	Network Controller
Ethernet Ports	1 x 10/100/1000 Mbps
USB Ports	1 x USB-C
Display	LCD Touchscreen
Operating Temperature	0 to 35° C (32 to 95° F)
Supported Devices	UniFi devices
Memory	3 GB
Storage	1 TB HDD (upgradeable)