UTD2000 Series User Manual
20
Figure 2-9 Vertical Channel Inverted Settings (Invert: ON)
2.6 Unit
Press UNIT to set the unit as “V” or “A”, the default unit is V. After the unit is set, the unit
on channel status tag will change accordingly.
2.7 Mathematical operation function
Display results of CH1 & CH2 waveform mathematic operation (+、–、×、÷).
Figure 2-10 Math Operation
Table 2-3：Math Menu
Mathematic operation (+、–、×、÷)
You can select signal source1 as CH1
You can select signal source2 as CH2
You can select signal source1 as CH1
You can select signal source2 as CH2
To Next Page
Loading...
Need help?
General
