UNI-T UTD2000 Series User Manual

UTD2000 Series User Manual
36
Chapter VI Display System
As shown in the figure below, the DISPLAY on the control area is the function button of
Display System.
Figure 6-1 Function Keys of Display System
Press DISPLAY button to enter display setting menu as shown in the table below.
Table 6-1 Display Menu (Page 1)
Function
Setting
Description
Types
Vector
Display sampled points in connection way.
Dots
Only display sampled data points.
Persistance
Set OFF, AUTO, steady persistence, infinite.
Menu
Set 5s, 10s, 20s, manualy.
Screen
protection time
Set OFF, 1min, 5min, 10min, 30min, 1 hour.
Next page
Go to next page
Table 6-2 Display Menu (Page 2)
Function
Setting
Description
Waveform
brightness
1%-
100%
Set waveform brightness
Grid
brightness
1%-
100%
Set grid brightness
Backlight
1%-
100%
Set backlight brightness
Grid
Set full grid, lattice, cross grid, frame
Previous
Go to previous page
Key point:
Display type: The vector will fill the blank between adjacent sampled points. The Dots
only displays sampled points.

UNI-T UTD2000 Series Specifications

General

Brand	UNI-T
Model	UTD2000 Series
Category	Test Equipment
Language	English