UNI-T UTD2000 Series User Manual

UTD2000 Series User Manual
42
 Edit file name
When the storage medium is USB, the stored file name can be edited, press file name to
enter file name edit window, as shown in the figure below:
Figure 9-2 File name window
Move the cursor by adjusting multifunctional knob, press multifunctional knob switch
to choose number or letter, press CONFIRM to go back to previous menu.
9.2 Waveform storage and load
Press the Storage button, then press F1 to choose storege type as Reference
Waveform, and you will see the following menu.
Table 9-2 Reference waveform menu (Page 1)
Function Menu
Setting
Description
Type
Reference
waveform
The selected storage type is reference waveform.
Source
REF A
Select load waveform to REF A.
REF B
Select load waveform to REF B.
Close
Close the loaded waveform.
Storage
Enter storage menu.
Load
Enter load menu.
Table 9-3 Waveform storage menu
Function Menu
Setting
Description
Data source
CH1/CH2
Select storage channel.
Storage medium
DSO, USB
Select the set storage location.
File name
Customized
Please refer section 9.1 “Edit file name”.
Store
Press the button to store.
Previous
Go to the previous page.

UNI-T UTD2000 Series Specifications

General

Brand	UNI-T
Model	UTD2000 Series
Category	Test Equipment
Language	English