10 UTG1000A Series
Chapter 2 Introduction
This device is economical, high-performance, multi-functional single channel waveform generators. It uses direct
digital synthesis (DDS) technology to produce accurate and stable waveforms, with a resolution as low as 1μHz. It
can generate accurate, stable, pure and low distortion output signals, also can provide high-frequency vertical edge
square waves. UTG1000’s convenient interface, superior technical indexes and user-friendly graphical display style
can help users to complete tasks quickly and improve work efficiency.
2.1 Main Features
• Sine wave output of 20MHz/10MHz/5MHz, full frequency range resolution is 1μHz
• Square wave/pulse waveform of 5MHz, and its rising, falling, and duty cycle time are adjustable
• Using DDS implementation method, with 125M/s sampling rate and 14bits vertical resolution
• 6-bit high precision frequency counter that is TTL level compatible
• Arbitrary waveform storage of 2048 points, and it can store up to 16 groups of nonvolatile digital arbitrary
waveforms
• Abundant modulation types: AM, FM, PM, ASK, FSK, PSK, PWM
• Powerful PC software
• 4.3-inch high resolution TFT liquid crystal display
• Standard configuration interface: USB Device
• Supports internal/external modulation and internal/external/manual trigger
• Supports sweep output
• Easy-to-use multifunctional knob and number keyboard
2.2 Panels and Buttons
2.2.1 Front Panel
UTG1000A series provides users with a simple, intuitive, and easy to operate front panel. The front panel is
shown in figure 2-1:
To Next Page
Loading...
Need help?
General
